Moto Guzzi 1000SP Spada SPECIFICATIONS, PRICE & IMAGES
Bike Features
Make Model:
Moto Guzzi 1000SP Spada
Year:
1980 – 82
Engine:
Four stroke,
90° V twin alloy, longitudinally mounted, OHV, 2 valve per cylinder, All plain bearing engine with two mains and split shell big ends.
One piece forged crankshaft. Steel con-rod split across big end eye.
Valve operation: Pushrod from camshaft between cylinder bases in crankcase.
Clearance by screw and locknut on rocker tips
Capacity:
949 cc / 57.9 cu-in
Bore x Stroke:
88 x 78 mm
Cooling System:
Air cooled
Compression Ratio:
9.2:1
Induction:
2 x 32mm Dell Orto instruments with mechanical
accelerator pumps. Single paper cartridge filter.
Lubrication:
5.5 pint wet sump via high pressure delivery
only gear pump. Replaceable paper cartridge and washable wire gauze filters.
Electrics:
12v 32a/h battery charged by crankshaft
mounted 190w
Alternator:
Coil and contact breaker ignition. Claimed
power:
Ignition:
Battery
Starting:
Electric
Max Power :
71 hp / 51.8 kW @ 6800 rpm
Max Torque:
84.3 Nm / 62.2 lb-ft @ 5200 rpm
Clutch:
Dry twin plate diaphragm unit
mounted on crankshaft end.
Transmission :
5 Speed
Final Drive:
Shaft, within right side pivoted fork leg. 4.71:1
reduction.
Gear Ratio:
1st 11.64, 2nd 8.08, 3rd 6.09, 4th 5.05, 5th 4.36:1
Frame:
Full loop duplex cradle in all welded steel
tube. Detachable lower left cradle rail for engine removal. Fully
triangulated and welded rear sub-frame.
Front Suspension:
35mm telescopic Two-way damped Moto Guzzi tele-fork
with De Carbon damping
Rear Suspension:
Pivoted fork with two-way damped, load
adjustable suspension units.
Front Brakes:
2x 300mm discs 2 piston calipers
Rear Brakes:
Single 242mm disc 2 piston caliper
Front Tyre:
100/90 H18
Rear Tyre:
110/100 H18
Wheelbase:
1473mm / 58 in
Seat height:
762mm / 30 in
Dry Weight :
210 kg / 460 lbs
Wet Weight:
244 kg / 538 lbs
Fuel Capacity :
24 Litres / 6.3 US gal
Consumption Average:
52 mpg
Standing
¼ Mile :
14.1 sec / 91.5 mph
Top Speed:
137 mph